Building a workshop workbench

January 19, 2010

Every shop needs a good workbench and its about time I built myself one. I sourced most of the parts locally from the $75 solid maple butcher block top to the $40 shelves with drawers I got at a local salvage yard. The only things I bought new were the three Rockler vises which I have yet to install. The picture above is of everything all mocked up.

I have assembled the bottom section out of 4×4′s and 2×4′s secured with long galvanized deck screws. The base frame itself is 45″ long and 23″ deep. The butcher block will overhang 3″ on the front and back, and 12″ and 18″ respectively on the left and right. This will accommodate the vice setup I will be installing but I will post more on that when its complete. For now, you can see more pictures by clicking on the image above.

Categories: Home, Shop, Woodworking

Leave a Reply

Your email address will not be published. Required fields are marked *


You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>

Copyright © 2005-2011 John Clarke Mills

Wordpress theme is open source and available on github.