ThermistorCalibration
From John Clarke Mills Project Wiki
Temperature sensors order from BMW part # 62110788115. They are just the simple one wire-hookup type, the housing is the ground. They were very easy to calibrate actually. A lot easier than I thought. Just get yourself a known working thermometer and freeze and boil some water measuring the Ohm's at 3 three known intervals. Here are my results
F | Ohms |
44 | 1.300 |
80 | 0.568 |
185 | 0.73 |
I then plugged them into my MegaSquirt and they all checked out. That simple.