MotorBeforeReassembly

From John Clarke Mills Project Wiki

Revision as of 06:59, 22 January 2006 by Millsj (Talk | contribs)
(diff) ←Older revision | Current revision (diff) | Newer revision→ (diff)
Jump to: navigation, search

I stopped by the machinist today to pick up my intake manifold so I can bore it out to fit my new 38/38 carb. While I was there I took some pictures of the motor components.

Here is the bottom of the head

Image:bottom of head.JPG

Here is the top of the head

Image:top of head.JPG

Here is the block cleaned and ready for boring and honing

Image:block cleaned.JPG

Retrieved from "http://johnclarkemills.com/wiki/MotorBeforeReassembly"
Personal tools