2002MotorInstall

From John Clarke Mills Project Wiki

Revision as of 04:57, 6 February 2006 by Millsj (Talk | contribs)
(diff) ←Older revision | Current revision (diff) | Newer revision→ (diff)
Jump to: navigation, search

Now that the motor is back in the shop its time to bolt everything up. Once the intake and exhaust manifolds and the starter were bolted up we were ready to drop it back in.

The motor is ready for reinstallation

Image:motor ready for install.JPG


The final push to get this project done
It took us almost 3 or 4 hours to get the transmission output shaft lined up with the clutch. What a pain in the ass that was

Image:motor going back in.JPG


Finally the motor is back in and plumbed up

Image:engine complete.JPG

Image:engine complete2.JPG

Retrieved from "http://johnclarkemills.com/wiki/2002MotorInstall"
Personal tools