2002MotorInstall

From John Clarke Mills Project Wiki

Revision as of 18:58, 3 February 2006 (edit) Millsj (Talk | contribs) ← Previous diff		Current revision (04:57, 6 February 2006) (edit) (undo) Millsj (Talk | contribs)
Line 10:		Line 10:
	[[Image:motor going back in.JPG]]		[[Image:motor going back in.JPG]]
		+
		+
		+	<b>Finally the motor is back in and plumbed up</b>
		+
		+	[[Image:engine complete.JPG]]
		+
		+	[[Image:engine complete2.JPG]]

---

Current revision

Now that the motor is back in the shop its time to bolt everything up. Once the intake and exhaust manifolds and the starter were bolted up we were ready to drop it back in.

The motor is ready for reinstallation

The final push to get this project done
It took us almost 3 or 4 hours to get the transmission output shaft lined up with the clutch. What a pain in the ass that was

Finally the motor is back in and plumbed up